Overall mold
dimensions for the standard molds is approx. 3 1/4" X 4".
Our new mini molds are approx. 2 1/8" by 2 7/8".
About Our
Molds:
Molds may vary in
colors from turquoise blue to soft gray.
Our molds are made from
Urethane rubber
for
Lasting strength.
Molds on this page ~ Jewelry Molds - Cabochons and More
Priority mail shipping only $5.15 in USA, Other countries see cart for
shipping
Buy several on same invoice and SAVE!
Another Brand New Mold!!
PJ039 Caboshapes
II - Divas
This new mold contains 12 NEW
Caboshapes featuring three stylized female figures, one large and
two smaller figures. Also included is a stylized tiny baby that is
small enough to be held in 'arms' or to be applied to the larger
figure to represent a “child within”. Free instructions are
included with the mold to make a “Mother Nature” pin or pendant.
There are 12 Unique Caboshapes
.
(1)Three stylized female forms, the largest being 4.375 inches long
by 1.125 inches wide.
(2)A small face that can be used on the larger
form. (3)
A tiny stylized baby. (4)
Two stylized shapes that can be used as
'hands' or 'wings' or feathers. (5)
One elongated teardrop shape. (6)
One
Collar that can be thin for an application or thick to form a bead
etc. (7)
One Crown, doesn't every diva need one? (8)
Two tiny accent parts,
a heart and a diamond shaped jewel.
Most of the parts have flat fronts and are about ¼” deep. Some of
the parts are curved. The depth of the smaller parts is from
1/8 inch to
3/16”
inch deep.
PJ038 Caboshapes I
This new mold is exciting and definitely NEW!
Caboshapes are non traditional and asymmetrical shapes for use in
jewelry and other fun projects. Free instructions to make a jewelry
project, including a 'silver' bezel,
11 Unique hand sculpted Caboshapes in this newest mold.
Three Shield-like shapes,
Four Triangle-like shapes,
One Cube / square,
Four Curved shapes
We are at it again! This time a new mold with non traditional fun
shapes. Most of the parts have flat fronts and are about ¼” deep.
Some of the parts are curved. The depth of the smaller parts is from
3/16” to ¼ inch deep.
Brand New!! PJ037
Settings (bezels) for standard cabochons.
This unique flexible rubber
mold of original, hand sculpted settings (bezels) was developed to
fit standard size oval cabochons. (We also have a mold that makes
oval cabochons that will fit in these settings. PJ036). 10
beautiful, hand sculpted parts in this mold.
Three ornate oval settings
(bezels),
One oval connector setting (bezel)
One Bale strip
Two full blown roses,
One rose leaf
Two rose swags
All in a Victorian rose
style. Complete instructions are included for making the setting
with or without a bale. Before baking the setting can be re-shaped
into a number of shapes.
NEW! NEW! PJ036
Cabochons for Standard Jewelry
Setting Sizes
A unique mold with 15 openings in 10 standard jewelry setting sizes:
40x30mm, 30x22mm, 25x18mm, 18x13mm, 16x12mm, 14x10mm, 12x10mm,
10x8mm, 8x6mm, & 7x5mm.
There are four openings of the smallest cab, 7x5mm and three
openings of the next to the smallest cab, 8x6mm in order to mold
multiples of these two tiny cabochons.
Instructions are included to make the faux Mokume Gane cabochons
samples shown.
PJ001 Almond Cabs & More
This
polymer clay mold
makes lovely almond cabochons for use in jewelry or other
embellishments where an almond shape is needed. One opening is
oval and one is round. This round will half fill the large round in
mold PJ003. Mold this large round, add a sheet of faux or decorative
clay to it taking care to remove air bubbles and press the laminated
circle into the large round in mold 3 to form a large, decorative
disk. .
PJ002 Cabs & More
Our most popular cabochons, this
mold has eleven different shapes, sizes and depths. Most are domed
but some are flat on top. There are six oval cabs, four round cabs,
and one flat sided oval. The two larger circle cabs and the flat
sided oval cab have flat tops that are good for hand painting or
coloring with oil pencils. The large, upper left mold is one of
those on which I often use to make portraits or scenes with Walnut
Hollow Oil Pencils.
PJ003 Egg Shapes, Two rounds & One Oval Cab
Shallow Egg shapes, one oval and two rounds.
The larger one can be used in tandem with the round in mold PJ001 to
make a large decorative disk or pendant.
PJ004 Dominoes & More
Two molds of actual dominoes, one large, one
small. Several molded dominoes can be patterned and strung to make
beautiful bracelets.
The football shape is flat on top.
The lower left oval is
rather flat, with a slight dome. It’s a favorite on which to draw.
It also fits a standard 30mm by 40mm jewelry setting.
PJ007 Bees Antique Mold
A molded antique brass pin. The center oval
has deepish points in it that will 'grip' a cabochon after molding.
There are two cabochons, one faceted and one smooth. Both fit in the
center oval of the pin allowing the pin to be made of one color or
material and the cabochon another. Also included is a sweet bee and
the words “Bee Happy” for imprinting.
With the
purchase of our polymer clay molds or tutorials, you have
permission to make one-of-a-kind pieces in any quantity to
sell at fairs, bazaars and craft shows; However, you may not
hire employees to make items from the molds, tutorials or
sell through commercial accounts without permission.